In HP printers while printing a page most of the times a separation pad error appears only due to the reason that more than the required is fed at once. It is essential to provide only one page at a time and not more than that, if it is more than the error appears. In order to get rid of this error, it is required to solve the issue by modifying separation pad error. This problem can be fixed by taking hp printer help from the technical supports by calling on hp printer support phone number (+1-844-335-9333). In case if the users wish to fix hp printer separation pad error by themselves before seeing help from hp printer support team, then required to follow the process.

Procedure to fix HP Printer Separation Pad error

HP printer separation pad error is easier to resolve on own by following some simple steps. These hp printer problems are not so difficult to solve and consumes only few minutes of user’s time. Here are the steps to fix the error.

Step 1:

  1. The first step involves replacement of separation pads on the printer, which starts by unplugging the power cable from the switch board to cool the printer.
  2. Then now it is required to remove all those input trays present and start searching for the blue separation.
  3. Now remove it from the spring-loaded base and immediately insert a screw driver that as flat edge inside the slot just below separation pad.
  4. Next at the opening part push upside spring-load along with the separation pads, by inserting new separation pad into the exact place by adjusting them.
  5. Now reinsert the pickup roller, print cartridge along with input trays and plug the printer to turn on the device.

Step 2:

  1. In the next step it is essential to replace the pickup roller, by unplugging the power cord from printer and let it to cool down.
  2. Then remove the print cartridge, then search for a pickup roller and adjust small along with white tabs on either of roller.
  3. Then move them away from roller and by rotating them pick-up towards the front side.
  4. Then replace it will new one into the slot and rotate into correct position till the white tabs appear at correct position.
  5. Now it is required to reinstall the print cartridges and close the door of the printer, by pluggin switch it on.

Step 3:

  1. In this step pickup roller of the printer is cleaned, by using cloth and rubbing it gently on roller.
  2. Then wipe out the roller to remove if any dirt persists, dry it and then install.

All the above steps will resolve the issue, in case if hp printer error still continues then consider hp printer support team. It is easy to approach them by calling on hp printer support phone number (+1-844-335-9333). So users can easily resolve all the issues pertaining to hp printers.

HP TECHNICAL SUPPORT (TOLL FREE) +1-844-335-9333

Dial Toll Free +1-844-335-9333